Publicité
Les langues disponibles
Les langues disponibles
●
Contents of the product
- 1 collar fitted with short contact points
- 1 nylon strap
- 1 lithium 3-V CR2 battery
- 1 magnetic key (magnet)
●
Presentation of the product
Nylon strap
●
Fitting the battery in the receiver collar
Unscrew the 4 screws of the battery cover using a screwdriver.
Insert the battery (3V Lithium CR2) paying attention to follow
polarity indicated on the battery housing.
A beep sound is emitted indicating the correct installation of the
battery. If you do not hear any beep sound after having inserted the
battery, remove it immediately from its housing. Check the polarity
before trying again.
Before putting the lid back in place, check that the rubber seal is in its
groove.
Retighten moderately the 4 screws.
●
Activate/deactivate the receiver collar
The supplied magnetic key allows you to activate/deactivate the collar.
▪
Activate: move the magnetic key towards the collar so that it comes into contact with the
second (ref. Diagram 3). The collar will emit one beep sound and the indicator light will flash in green indicating the collar is On.
▪
Deactivate: move the magnetic key towards the collar so that it comes into contact with the
second (ref. Diagram 3). The collar will emit two beep sounds and the indicator light will flash in red then go out indicating the collar is Off.
User's guide – CLASSIC DOG FENCE/DELUXE GROUND+ FENCE receiver collar – indice B
Contact points
(short or long)
Indicator light:
On/Off indicator
+
battery level indicator
- 1 neon test lamp
- 1 pair of long contact points
- this user's guide
symbol:
area where the switch magnet is located
This magnet allows you to switch On/Off the
collar and to select the level of static
correction
Magnetic key
(magnet)
Battery polarity indicators
Diagram 1
Diagram 2
Battery
Seal
symbol located on the collar, hold for 1
symbol located on the collar, hold for 1
3/16
Publicité
