Ryobi RM480e Traduction Des Instructions Originales page 8

WARNING
Use extreme caution when lifting or tilting
the product for maintenance, cleaning,
storage, or transportation. The blade is
sharp. Keep all body parts away from the
blade while it is exposed.
TRANSPORTING LEAD-ACID BATTERIES
Transport the battery in accordance with local
and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further
advice.
TOWING SAFETY WARNINGS
WARNING
Use extreme caution when towing the
product. The blade is sharp. Keep all body
parts away from the blade while it is exposed.
■ Use common sense when towing. Too
heavy of a load while on a slope is
dangerous. Tyres can lose traction with the
ground and cause you to lose control of the
product.
■ Follow the
recommendations for wheel weights or
counterweights.
■ Total towed weight must not exceed
the maximum towing load of 226.8 kg
(500 lbs.).
■ Attach tow equipment only at the hitch
plate.
■ Never allow children or others on the towed
equipment.
■ Stopping distance increases with speed
and weight of load being towed. Travel
slowly and allow extra time and distance
to stop.
■ Do not turn sharply when towing. Use
additional caution when turning or operating
under adverse surface conditions. Use
care when reversing.
6 | English
MAINTENANCE
Use
replacement
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
Servicing
knowledge and should be performed only
by a qualifi ed service technician. Have the
product serviced by an authorised service
centre only. When servicing, use only
original replacement parts.
■ Maintain the product with care and in good
working condition. Keep blades sharp and
guards in place and in working order. To
prevent serious personal injury, prevent
damage to the product, and to maintain
best performance, replace damaged, bent,
cracked, or unevenly worn out blades. An
unbalanced blade causes vibration that
could damage the motor drive unit or could
cause personal injury.
■ Never make any adjustments or repairs
while the motor is running and the blades
are moving.
■ Remove the start key from the product
before storing, servicing, or changing
accessories.
measures reduce the risk of starting the
manufacturer's
product accidentally.
■ Turn off the product, engage the parking
brake, and remove the start key. Make
sure that all moving parts have come to a
complete stop:
●
●
●
●
●
●
WARNING
only original
parts, accessories
WARNING
requires extreme
Such preventive
before leaving the product unattended
(including disposal of grass clippings).
before clearing blockages or unclogging
discharge chute
before checking, cleaning, or working on
the product
before removing the mulch cover
before opening the grass discharge
chute cover
after striking a foreign object
– thoroughly inspect the product for
any damage
manufacturer's
and
care and
safety