Ryobi RM480e Traduction Des Instructions Originales page 28

Reverse mode operation:
WARNING
The product will emit a constant beeping
sound when operated in reverse with either
the blade off or in reverse mode operation.
1. Step on the brake pedal, and bring the
product to a complete stop.
2. Push down the blade engage knob to
stop the blades.
3. Press the reverse mode button.
4. Pull up the blade engage knob.
26 | English
5. Set the direction control switch in
reverse (R) position. Slowly step on the
accelerator pedal, and reverse mow as
needed.
WARNING
Do not mow in reverse unless absolutely
necessary. Always look down and behind
before and while reversing to make sure
no children, bystanders, or pets enter the
mowing area. Be aware that the reverse
mode operation is activated when the
reverse mode button is illuminated in red
and a constant beeping sound is emitted.
Remember that a careless fraction of a
second is suffi cient to infl ict death or serious
injury.
When mowing is complete:
WARNING
Stop the product on a fl at, level surface. Do
not stop the product on a slope.
1. Step on the brake pedal, and engage the
parking brake.