Before Using The Appliance The First Time; Assembly - Unold 68801 Notice D'utilisation

edge of the countertop or
table, since this can cause
accidents, for example if
small children pull on the
cord.
20. Do not wrap the power cord
around the appliance and
avoid kinking of the power
cord to prevent damage.
21. Route the power cord so that
there is no possibility of the
Caution: Avoid contact with moving parts of the appliance when
it is in operation.
Never open the housing of the appliance. This can result in electric
shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials
and any transport safety devices.
Keep packaging materials away
from children - danger of suffoca-
tion!

ASSEMBLY

1. Before assembling the appliance,
make sure that it is not plugged
into the electrical outlet.
2. Place the appliance on a solid,
level and dry surface.
3. Push the screw cover onto the
feed screw axle. Make sure that
the notches on the cover line up
with the depressions on the feed
screw axle. (Fig. 1)
Copyright UNOLD AG | www.unold.de
cord being pulled or tripped
over.
22. Do not move the appliance
as long as it is in operation,
to prevent injuries.
23. Do not use hot liquids.
24. Do not switch on the appli-
ance if the lid is not in place.
2. Clean all components with a damp
cloth, as described in the chapter
"Cleaning and care".
Fig. 1
25