1
Prepare the sound source.
2
Press TIMER MENU .
3
Press / to select "PLAY
SET," then press
The start time flashes in the display
window .
4
Press / to select time, then
.
press
Follow the same procedure to set
"MINUTE" of the time to start operation,
then "HOUR" and "MINUTE" of the time
to stop the operation.
5
Press / to select the
desired sound source, then press
.
The confirmation display for the Play
Timer appears.
6
Press / to turn off the
system.
Tip
When the sound source is a radio, make sure to
tune-in to the radio station before turning off
the system (page 17).
To change the timer setting, perform the
procedures from the beginning again.
Note
The system turns on exactly at the time set in
Play Timer. When the sound source is a CD,
MP3/WMA disc or USB, it may take some time to
start playback.
The Play Timer does not work if the system is
already on at the preset time.
When the sound source for a Play Timer is set to
a radio station, the last played frequency is used
for a Play Timer. If you change the radio
frequency after setting the timer, the radio
station setting for the timer will also be
changed.
To check the setting
1
2
3
.
To cancel the timer
Select "OFF" in step 3 of "To check the
setting" (page 27).
Press TIMER MENU .
Press / to select "SELECT," then
.
press
Press / to select "PLAY SEL," then
.
press
The timer setting appears in the display window
.
27
GB