Configuring Audible Alerts - Sygonix 2299890 Notice D'emploi

• Enter the desired function:
= the alarms are switched off.
- = the alarms sound for 1 to 3 minutes. (The default
setting is one minute.)
• Press the
will briefly turn green and then flash red (programming mode).
• To exit programming mode, press the
indicator (2) will switch to constant red to indicate that the
code lock is in standby mode.
i) Configuring audible alerts
You can turn the indicator and warning signals of the code lock
on or off.
To set the audible alerts, proceed as follows:
• The code lock must be in standby mode and the LED
indicator must be red.
• Enable programming mode (see section 11 "Programming",
paragraph "b) Enabling/exiting programming mode"). The
LED indicator will then flash red.
Example:
• Press the
briefly turn green, and then orange again.
• Press the
key to confirm your entry. The LED indicator (2)
key to confirm your entry. The LED indicator will
key. The LED indicator (2) will turn orange.
key. The LED
41