Remote Control; Programming; General Information - Sygonix 2299890 Notice D'emploi

10. Remote control

The remote control is used to program the code lock by pressing
a button. If a digit is requested in the following section, use the
corresponding button on the remote control.
• Point the remote control in the direction of the code lock to
make settings and program users.
• Press the designated button as described.
• The code lock will beep to confirm each entry.

11. Programming

a) General information
Program the code lock at the installation location/
before mounting to reduce the installation time.
22
Number keys 0 to 9
Asterisk key
Hash key