Preparation; Control Elements; Fitting And Removing The Auxiliary Handle; Attaching And Removing The Guard Cover - Parkside Ppwsfa 20-Li A2 Traduction Des Instructions Originales

WARNING! Danger due to electro-
magnetic field generated while the tool is
in operation. Under certain circumstances,
this field may negatively affect active or
passive medical implants. In order to re-
duce the danger of serious or fatal injur-
ies, we recommend that individuals who
wear medical implants should consult their
doctor and the manufacturer of the im-
plant before operating the machine.

Preparation

WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.

Control elements

Familiarise yourself with the operating ele-
ments before using the device for the first
time.
Unlock button (13)
• The charge level indicator (11) on the
control panel lights up.
• You can operate the tool until the
charge level indicator goes out.
Speed button (14)
Switch speed level
• 1≙ lowest speed level
• 6 ≙ highest speed level
47.9 x 21 mm
35x12mm
ISO AT
• The display (12) shows the selected
WEEE:
PPWSFA 20-Li A2
Akku-Flachkopf-
U: 20 V
Winkelschleifer
n : 8500 min -1 Meuleuse d'angle sans fil
0 speed level.
à tête plate
M14 Ø 125 mm
Smerigliatrice angolare a Grizzly Tools
testa piatta ricaricabile GmbH & Co. KG
Stockstädter Str. 20
63762 Großostheim
Manufactured: 01/2024
GERMANY
IAN: 445972_2307 S./N.:
Art.-Nr. 71000210
ISO FI
PPWSFA 20-Li A2 WEEE:
Cordless Flat Head Angle
U: 20 V Grinder
Litteäpäinen
n : 8500 min -1
0 akkukulmahiomakone
M14 Ø 125 mm
Batteridriven vinkelslip
Grizzly Tools
planhölje
GmbH & Co. KG
Akku-Flachkopf-
Stockstädter Str. 20
Winkelschleifer
63762 Großostheim
Manufactured: 01/2024
GERMANY
IAN: 445972_2307 S./N.:
On/Off button (15)
Art.-Nr. 71000211
ISO HU, CZ, SK
WEEE:
PPWSFA 20-Li A2
Cordless Flat Head Angle
Grinder
U: 20 V
Akkus laposfejű
n : 8500 min -1
sarokcsiszoló
0
A +
M14 Ø 125 mm Aku úhlová bruska s = ON
plochou hlavou Grizzly Tools
Aku uhlová brúska s GmbH & Co. KG
plochou hlavou
Stockstädter Str. 20
Akku-Flachkopf-
63762 Großostheim
Winkelschleifer
Manufactured: 01/2024
GERMANY
Switching on: Press the On/Off button
IAN: 445972_2307 S./N.:
Art.-Nr. 71000212
B + =
ON
ISO ES, IT
twice in quick succession.
WEEE:
PPWSFA 20-Li A2
Amoladora angular de
U: 20 V cabezal plano recargable
Smerigliatrice angolare a
n : 8500 min -1
testa piatta ricaricabile
0 Switching off: Press the On/Off button
Rebarbadora de cabeça
M14 Ø 125 mm
lisa a bateria
Grizzly Tools
Cordless Flat Head Angle
GmbH & Co. KG
Grinder
Stockstädter Str. 20
Akku-Flachkopf-
Winkelschleifer 63762 Großostheim
Manufactured: 01/2024
GERMANY
IAN: 445972_2307 S./N.:
Art.-Nr. 71000213
or the Unlock button.
ISO IE
WEEE:
PPWSFA 20-Li A2
Cordless Flat Head
U: 20 V
Angle Grinder
n : 8500 min -1
Akku-Flachkopf-
0
M14 Ø 125 mm Winkelschleifer
Grizzly Tools
GmbH & Co. KG
Stockstädter Str. 20
63762 Großostheim
Manufactured: 01/2024
GERMANY
IAN: 445972_2307 S./N.:
Art.-Nr. 71000214
ISO HR, RS, BG, GR, CY
PPWSFA 20-Li A2 WEEE:
Cordless Flat Head Angle
Grinder
U: 20 V
Aku kutna brusilica s
n : 8500 min -1 plosnatom glavom
0
Aku ugaona brusilica
M14 Ø 125 mm
Акумулаторен ъглошлайф
с плоска глава
Επαναφορτιζό ενος Grizzly Tools
επίπεδος γωνιακός τροχός GmbH & Co. KG 005 24
Akku-Flachkopf-
Stockstädter Str. 20
Manufactured: 01/2024 Winkelschleifer
63762 Großostheim
GERMANY
IAN: 445972_2307 S./N.:
Art.-Nr. 71000215
LB 8
15x15 mm
Hangtag 60x40mm
+ = ON
2x
Hangtag LB 8
60x40mm
+ = ON
2x
Spindle lock (8)
• Locks the spindle when attaching/re-
moving the attachment tool.
Fitting and removing the
auxiliary handle
WARNING! Loss of control can res-
ult in injuries! Never operate the device
hands-free without the auxiliary handle.
Mounting the auxiliary handle
You can attach the auxiliary handle to the
right and left of the device.
1. Turn the auxiliary handle (4) firmly into
one of the two mountings.
Removing the auxiliary handle
1. Turn the auxiliary handle (4) out of the
mounting.
Attaching and removing the
guard cover
Requirements
• Battery removed from device
• Attachment tool and mounting flange
(26) removed
Fitting the guard cover (Fig. A)
1. Place the guard cover (7) on the tool
so that the open side faces the tool.
The recesses on the guard cover must
fit into the grid (29) on the tool, only
one position is possible.
40.5 x 6.3 mm
2. Press and hold the release lever (30)
BRUSHLESS PPWSFA 20-Li A2
of the guard cover towards the device.
3. Turn the guard cover (7) at least ¼
turn.
4. Let go of the release lever (30).
5. Move the guard cover (7) a little until it
clicks into place.
You can now fit an attachment tool.
Removing the guard cover (Fig. A)
1. Press the release lever underneath the
guard cover (30) towards the tool and
turn the guard cover (7) right until the
GB MT
43