Hamilton Beach Stack & Scrape 63380 Manuel page 5

How to Use
Before first use: Wash Bowl
and attachments in warm,
sudsy water; rinse and dry.
Always unplug Mixer from outlet
before inserting or removing
attachments.
4. Place Bowl on Base, aligning
Bowl Alignment Ribs with Bowl
Alignment Indents in Base.
1. Ensure Mixer is unplugged and
Speed Control is set to OFF ( ).
5. If using, place Bowl Scraper in Bowl.
Add ingredients to Bowl.
WARNING
Cut and Crush Hazard.
Unplug mixer before inserting or removing attachments. Failure to do
so can result in broken bones or cuts.
2. Press Head Lift Button.
6. Push attachment up onto
Attachment Shaft and turn
clockwise.
3. Tilt Mixer Head up.
7. Press Head Lift Button. Tilt Mixer
Head down.
5