Dimplex Optimyst CDFI500-PRO-RGB Guide D'installation Et D'utilisation page 17

Operation
Remote Control Operation
Standby
Timer
Flame intensity
control
Volume control
Flame theme
Brightness
Prees to turn flame effect on or put the unit into standby mode.
!
NOTE: When the unit is first turned on the lights will come on and mist will appear
after 45 seconds.
Press once to set the timer for one hour, press twice to set the timer for two hours,
press three times to set the timer for four hours, press four times to cancel the timer.
The timer starts five seconds after last button press.
To cancel the timer after it has been set, put the unit into standby.
The fireplace goes into standby after the time has elapsed.
Press to adjust the flame intensity. It will take a moment for the change to be seen.
Press to adjust the volume of the wood fire sound effects.
Use the tethered controller to toggle the wood fire sound effects on or off.
Press repeatedly to cycle through the six different Flame themes:
1 - Natural Flame
2 - Blue
3 - Violet
4 - Red
5 - Aquamarine
6 - Prism Mode - the flames will cycle through the different colors
Press repeatedly to cycle the Flame brightness settings. The sixth setting produces a
pulsating effect.
17