Sharpening The Saw Chain; Cleaning, Storage And Ordering Of Spare Parts; Ordering Replacement Parts; Disposal And Recycling - EINHELL BG-LC 1815 T Mode D'emploi D'origine

please contact our service department or another
similarly qualifi ed workshop.
Caution! Do not actually touch the surface with
the tip of the cutter bar when performing this test.
Keep a safe distance (approx. 20 cm).

8.3 Sharpening the saw chain

Working eff ectively with the chainsaw is only pos-
sible if the chain is in good condition and sharp.
This also reduces the risk of kickback.
The chain can be re-sharpened by any dealer. Do
not attempt to sharpen the chain yourself unless
you have the necessary special tools and expe-
rience.
9. Cleaning, storage and ordering of
spare parts
9.1 Cleaning
•
Regularly clean the tensioning mechanism by
blowing it out with compressed air or cleaning
it with a brush. Do not use any tools for
cleaning.
•
Keep the handles free of oil so that you can
maintain a firm grip.
•
Clean the equipment as required with a damp
cloth and, if necessary, mild washing up li-
quid.
•
If you are not going to use the chainsaw for an
extended period of time, remove the chain oil
from the tank. Briefly immerse the saw chain
and the cutter bar into an oil bath and then
wrap them in oil paper.
Caution!
•
Remove the battery before cleaning.
•
Never immerse the equipment in water or
other liquids in order to clean it.
9.2 Storage
Store the equipment and accessories out of the
reach of children in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 5 and 30 °C.
Anleitung_BG_LC_1815_T_SPK7.indb 25 Anleitung_BG_LC_1815_T_SPK7.indb 25
GB

9.3 Ordering replacement parts

Please provide the following information on all
orders for spare parts:
•
Model/type of unit
•
Article number of unit
•
ID number of unit
•
Part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info

10. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Defective components must be dispo-
sed of as special waste. Ask your dealer or your
local council.
- 25 -
31.10.11 10:27 31.10.11 10:27