RIDGID R4092 Manuel D'utilisation page 22

ASSEMBLY
INSTALLING SLIDING TABLE EXTENSION
See Figure 30.
 From the side of the saw, align the pins on the sliding
table extension with the holes in the frame.
 Secure in place by turning the table extension lock knob
underneath the extension clockwise.
SLIDING TABLE
SLIDING TABLE
EXTENSION
TABLE
EXTENSION
LOCK KNOB
WATER TRAY
EXTENSION
INSTALLING SIDE WATER TRAY EXTENSION
See Figure 31.
From the right side of the saw, slide the second (or side)
water tray extension into the slots on the frame and sliding
table extension.
INSTALLING THE MITER GUIDE
See Figure 32.
The miter guide can be used from both the left and right side
of the cutting wheel.
 Place the slot on the underside of the miter guide on the
 Lock the miter guide securely to the table by turning the
To adjust angles:
 Loosen the miter guide knob.
 Set to the desired angle by rotating the guide left or right.
 Tighten the knob securely before turning on the saw.
Fig. 30
SLOTS
Fig. 31
22 — English
sliding table fence.
lock knob clockwise.
MITER
GUIDE
MITER GUIDE
KNOB
LOCK
KNOB
Fig. 32