Setting The Operation Modes; Setting The Cooling Level; Repositioning The Shelves - Dometic Nrx0035E Manuel D'utilisation

EN NRX35-130
9.6

Setting the operation modes

NOTE When using the ECO, PERFORMANCE or FREEZER mode the system stays in this mode until further
changes.
To set the operation mode, press the
operation mode lights up.
The following operation modes are available:
Using the ECO mode
With the ECO mode activated the refrigerator operates with reduced energy consumption at cooling levels 1 – 3.
The operation mode indicator LED for the ECO mode ( ) and the selected cooling level indicator LED light up.
Using the QUIET mode
With the QUIET mode activated the refrigerator operates with reduced noise level at cooling levels 1 – 4.
NOTE
The QUIET mode is not available if the refrigerator is running in FREEZER mode.
When using the QUIET mode the refrigerator will stay in this mode for 8 h and then return to the
previously selected mode (ECO or PERFORMANCE mode).
The operation mode indicator LED for the QUIET mode ( ) and the selected cooling level indicator LED light up.
Using the PERFORMANCE mode
With the PERFORMANCE mode activated the refrigerator operates in standard mode at cooling levels 1 – 5.
The operation mode indicator LED for the PERFORMANCE mode ( ) and the selected cooling level indicator LED
light up.
Using the FREEZER mode
With the FREEZER mode activated the complete interior of the refrigerator is cooled to – 6 °C .
NOTE Remove the frozen compartment to use the FREEZER mode.
The operation mode indicator LED for the FREEZER mode ( ) and all cooling level indicator LEDs light up
continuously.
9.7

Setting the cooling level

To set the cooling level, press the
9.8

Repositioning the shelves

WARNING! Risk of child entrapment
NRX0060–0130: All shelves are fixed in place to prevent children from climbing into the refrigerator.
Only remove the shelves for cleaning purposes.
Refit the shelves and secure them in place.
16
button repeatedly until the operation mode indicator LED for the desired
button repeatedly until the desired cooling level is reached.