Checking The Hedge Trimmer; Checking The Controls; Operating The Hedge Trimmer; Holding And Controlling The Hedge Trimmer - Stihl 4869 Notice D'emploi

9 Checking the Hedge Trimmer

9 Checking the Hedge Trimmer
9.1

Checking the Controls

Retaining latch, trigger lockout and trigger
► Pull the connecting cable plug out of the socket.
► Push the retaining latch into position
► Attempt to pull the trigger lever without depressing the
lockout button.
► If the trigger can be pulled: Do not use your hedge trimmer
and contact your STIHL servicing dealer.
Retaining latch or trigger lockout is faulty.
► Push the retaining latch into position
► Depress the trigger lockout lever and hold it in that
position.
► Pull the trigger.
► Release the trigger and trigger lockout lever at the same
time.
► If the trigger or trigger lockout lever is stiff or does not
spring back to the idle position: Do not use your hedge
trimmer and contact your STIHL servicing dealer.
Trigger or trigger lockout is faulty.
Switch lever
► Pull the connecting cable plug out of the socket.
► Depress the switch lever and release it again.
► If the switch lever is stiff or does not spring back to its idle
position: Do not use your hedge trimmer and contact your
STIHL servicing dealer.
The switch lever has a malfunction.
Switch on the hedge trimmer
► Insert the connecting cable plug.
► Depress the switch lever and release it again.
► If the cutting blades have run or are running: Do not use
your hedge trimmer and contact your STIHL servicing
dealer.
The trigger has a malfunction.
0458-005-9621-A
► Depress the trigger lockout lever and hold it in that
position.
► Pull the trigger and hold it there.
► If the cutting blades run: Do not use your hedge trimmer
and contact your STIHL servicing dealer.
The switch lever has a malfunction.
► Depress the switch lever and hold it in that position.
The cutting blades run.
.
► If 3 LEDs flash red: Pull connecting cable plug out of the
socket and contact your STIHL servicing dealer.
There is a malfunction in the hedge trimmer.
► Release the switch lever.
The cutting blades stop running after about 1 second.
► If the cutting blades continue to run after 1 second: Pull
connecting cable plug out of the socket and contact your
.
STIHL servicing dealer.
Your hedge trimmer has a malfunction.

10 Operating the Hedge Trimmer

10.1 Holding and Controlling the Hedge Trimmer

► Hold the hedge trimmer with one hand on the control
handle – wrap your thumb around the control handle.
► Hold the hedge trimmer with the other hand on the loop
handle – wrap your thumb around the loop handle.
English
43