Oceanic GEO 4.0 Manuel D'utilisation page 9

Ordinateuer de plongée
Table des Matières

Publicité

BOUTONS
BUTTONS
Le Geo 4.0 utilise 4 boutons de commande appelés MODE, SELECT (sélection), ADV (avance) et LIGHT (éclairage). Ils vous
The Geo 4.0 utilizes 4 control buttons called the MODE, SELECT, ADV. (Advance) and, LIGHT buttons. They allow you
permettent de choisir les modes et d'accéder à des informations particulières. Ils sont également utilisés pour choisir les
to select mode options and access specific information. They are also used to enter settings, activate the backlight, and
réglages, activer le rétroéclairage et paramétrer les alarmes sonores.
acknowledge the audible alarm.
Différentes combinaisons de ces boutons vous feront naviguer au travers des différents menus et options du Geo 4.0. Les
Pressing different combinations of these buttons will navigate through different menus and options of the Geo 4.0. The
symboles du tableau ci-dessous illustrent la manière de procéder.
symbols in the table below will illustrate how to proceed through the menus.
SYMBOL
SYMBOLE
© Pelagic, 2019
© Pelagic, 2019
MEANING
PRESS BUTTON LESS THAN 2 SECONDS
SIGNIFICATION
APPUYEZ SUR LE BOUTON MOINS DE
2 SECONDES
HOLD BUTTON GREATER THAN 2 SECONDS
MAINTENEZ LE BOUTON ENFONCÉ PLUS DE
2 SECONDES
9
9
GEO 4.0 – MANUEL D'UTILISATION
Doc. No. 12-5670-r01 (2/27/18)
Doc. N° 12-5670-r01 (2/27/18)

Publicité

Table des Matières
loading

Table des Matières