Cleaning The Condenser Fins - Wessamat HighLine W25 LE Mode D'emploi

User manual - English

7.2.3 Cleaning the condenser fins:

!
CAUTION
The condenser fins are sharp-edged, which could lead to injuries. Please wear
suitable protective gloves!
Switch off the machine at the production switch (Position Produktion aus/off").
1.
2. Loosen dirt particles, dust and fluff that may have deposited on the condenser fins using a
brush with coarse bristles (not a metal brush!). For persistent deposits on the fins, use
compressed air. Then use a vacuum cleaner to remove the dust.
3. Spray grease deposits (particularly when the machine is located in kitchen areas) with a
fat-dissolving cleaning solution, allow some time to act, then rinse with warm water (ensure that
cleaning solution or water do not come into contact with electrical components). Blow-dry the
condenser fins with compressed air (if very wet) or rub dry with a cloth.
Switch on the machine on the production switch (Position "Produktion ein/on").
4.
Abb. 7.2.3: Schematic diagram of the cleaning procedure
User-manual-HighLine-v.02
Cleaning tutorial
01/2021 56