Storage; Technical Data And Machine Description; Identification; Noise Level - Wessamat HighLine W25 LE Mode D'emploi

User manual - English
IMPORTANT:
If the icemaker ist transported, if order to make sure that any water rest still
inside it, tilt the icemaker rearward,so that the water can be fully evacuated.
!! WARNING
Don't grip in an open, in service icemaker! There ist the danger, due to the
movements of the tub, that will cause injuries due to arm pinching.

3.3 Storage

If your machine is not immediately installed or commissioned after delivery or relocation, it
should be stored in a dry place and at temperatures above freezing

4. Technical data and machine description

4.1 Identification

The nameplate can be found on the inside of the machine on the separate wall between the ice
preparation system and the refrigeration assembly. A further nameplate is situated on the left
side in the storage bin.
The CE mark is located at the front of the ice cube maker.
The information provided on the identification plate matches the machine specification (see
page 3)

4.2 Noise level

The continuous sound pressure level emitted by the machine is < 70 dB(A).
Depending on local conditions, higher sound pressure levels may occur.
User-manual-HighLine-v.02 01/2021 41