Packaging, Storage And Transport; Delivery Status; Packaging And Transport - Wessamat CombiLine W80 Manuel De L'utilisateur

User manual - English

3 Packaging, storage and transport

Delivery status

3.1
The machine is supplied in two packages. The corresponding operating fluids (e.g. refrigerant)
are already contained.

Packaging and transport

3.2
After unwrapping the machine, keep the original packaging if possible. If the machine has to be
dispatched, the original packaging should be used if possible. Please indicate the position of the
machine within the packaging on the outside of the packaging.
(„Top ")
If the machine has to be dispatched or relocated, please also
note the instructions in the previous sections.
Before packing the machine, please remove the water and the ice
completely out of the machine.
ADVICE:
In order to completely empty the water from the ice production
trough, switch the machine to Position "Produktion aus/off" at the
production switch. If ice cubes are present on the evaporator fin-
gers, please wait until these detach of their own accord and fall
into the storage container. Now remove the ice cubes from the
storage container and wipe out the container with a cloth in order
to remove residual moisture. Close off the water supply, pull out
the power plug and separate all hose connections.
IMPORTANT:
If the icemaker ist transported, if order to make sure that any water rest still inside it, tilt
the icemaker rearward,so that the water can be fully evacuated.
!! WARNING
Don't grip in an open, in service icemaker! There ist the danger, due to the movements of
the tub, that will cause injuries due to arm pinching.
User-manual-CombiLine-W80-W120-W240-0299-2
Incline slitlly backwards
Seite 46