Technical Data - Husqvarna FS 4600 G II Manuel D'utilisation

Technical data

Engine *
Engine brand, type
Engine power, kW/hp@rpm
Displacement, cu.in./l
Cylinders
Air filter
Starter
Fuel
* = For further information and questions about this
specific engine, refer to the engine manual or the web
site of the engine manufacturer.
Note:
This engine is configured for this product and
does not have standard dimensions on the engine oil
Fuel and lubrication system
Fuel tank capacity, gal/l
Engine oil capacity, qt/l
Engine oil
Gearbox oil capacity, qt/l
Gearbox oil
Rear differential axle oil capacity, qt/l
Rear differential axle oil
Hydraulic lift pump oil capacity, qt/l
Hydraulic lift pump oil
Hydraulic drive pump capacity, qt /l
Hydraulic drive pump oil
Coolant fluid capacity, qt/l
1
As specified by engine manufacturer. Gross power rating as per SAE J1995, at specified rpm.
48
Technical data
1
4.8/18.0
4.4/4.2
SAE 10W-40 or SAE 15W-40. API Class SL
0.375/0.355
AGMA 6 EP, ISO VG 320 - Gear oil (EP)
1.0/0.95
TO-4 SAE 50
1.5/1.4
ATF DEXRON II
1.6/1.5
SAE 10W-40 or SAE 15W-40 API Class SL
7.0/6.7
Kubota WG1605
37.0/49.6@3000
93.79/1.537
4
Dry radial seal with pre-cleaner and restriction indicator
Electric
Unleaded gasoline, E0–E10
container. Refer to table below for the correct quantity of
oil contained in the engine.
1657 - 001 - 08.09.2021