Husqvarna FS 4600 G II Manuel D'utilisation page 23

CAUTION:
locking function when the engine is at idle
speed or off. The lever for speed control
must be in the stop position.
• Pull out and turn the differential locking knob (A) to
engage the differential locking function.
A
1657 - 001 - 08.09.2021
Only engage differential
To use the correct working technique
• Stay away from the blade path while the engine is
on. The correct operator position is between the
handles.
WARNING:
tilt rearward and cause injury or damage.
Be careful when you tilt the product
rearward or lift the product.
• Examine the cutting blade frequently for cracks and
broken parts during the work day. Do not use a
damaged cutting blade.
WARNING:
you examine the cutting blade.
• Do not grind with the side of the cutting blade. The
cutting blade can break and cause injury to the
operator or bystanders. Only use the cutting edge.
• Do not bend or twist the cutting blade in the cut.
• Make sure that the cutting blade moves freely and
does not catch in the cut.
The product can easily
Stop the engine before
23