Connecting The Masterliner To A Wire Drum En; Wire Feed Side En - Abicor Binzel MasterLiner Maxi Flex Mode D'emploi

6 Putting into operation
6.1.2 Connecting the MasterLiner to a wire drum
NOTICE
• We recommend connecting the wire guide to the wire drum cover using a QC quick coupling.
• Ensure that the quick coupling is correctly and securely attached to the wire drum.
1
1 Connection for 2 MasterLiner Maxi with
the wire drum quick coupling
cover
Fig. 7 Wire drum connection
1 Push the connection sleeve (quick coupling) (3) with the wire guide onto the connection (1). Twisting the
connection sleeve (3) prevents the connection from accidentally coming loose.
Compatible threaded connections are available for all MasterLiner versions without a QC quick coupling.
The order data and ID numbers can be found in the current product catalogues.
Contact details for advice and orders can be found online at www.binzel-abicor.com.
6.1.3 Wire feed side
Feed in the welding wire until reaching the wire feeder.
Next, cut off the bent section of wire.
Push the wire into the wire feeder's wire inlet.
Connect the MasterLiner's quick connector to the wire feeder
and feed in the wire.
Twist the connection sleeve clockwise
to prevent the quick connector from accidentally
coming loose.
Fig. 8 Wire feed side
EN - 12
MasterLiner Maxi Flex/HD; Basic Flex/HD
2
3
4
5
3 Connection sleeve 4 Wire drum cover
(quick coupling)
5 Wire guide (inside wire
drum)
Wire feeder wire inlet