Dimmer Curve - Cameo Multi PAR Manuel D'utilisation

OPERAtiOn:
FlOW inVERt
The direction of flow of lighting sequences, for example,
in the METEOR programme, can be inverted using the
"FLOW INVERT" function.
Press the MODE button repeatedly until "FLOW INVERT"
appears in the display. Now press ENTER. The cursor
appears in the bottom line of the display. Use the UP and
DOWN buttons to select whether the flow direction should
be inverted (ON) or not (OFF). To confirm the input, press
ENTER.

DiMMER CuRVE

The operating modes "DIMMER CURVE LED" and "DIM-
MER CURVE HALOGEN" can be used to determine how the
light reacts to sudden, large jumps in DMX dimmer values
in DMX mode (DMX value 000 directly to 255 and the
other way round). In "LED" mode, the lights react to the
change in value immediately without delay and in "HA-
LOGEN" mode they react in a manner similar to that of a
halogen lamp with a slight delay (pre-glow and afterglow).
Press the MODE button repeatedly until "DIMMER CURVE"
appears in the display. As soon as you press ENTER, the
cursor appears in the bottom line of the display. Now the
desired mode can be selected using the UP and DOWN
buttons. Confirm the input with ENTER.
13