Cameo Multi PAR Manuel D'utilisation page 8

COntROlS AnD DiSPlAY:
1
nEutRik POWERCOn POWER inPut SOCkEt
Power cord with matching Neutrik PowerCon plug included. Always make certain that the operating voltage
of the multi PAR lighting system (printed on the rear panel) matches the mains voltage in your region
2
nEutRik POWERCOn POWER OutPut SOCkEt
For powering additional CAMEO lighting products. Make certain that the power consumption of the connec-
ted devices does not exceed 10 amperes.
3
FuSE hOlDER
IMPORTANT INFORMATION: Replace the fuse only with a fuse of the same type and rating. If the fuse blows
repeatedly, please contact an authorised service centre.
4
DMX inPut
Male, 3-pole XLR socket. Used for connection to a DMX mixer or other DMX controllers. The connection is
made using a DMX cable.
8
15
16
A
13
B
B