Cameo Multi PAR Manuel D'utilisation page 14

OPERAtiOn:
iR ACtiVE
In "IR ACTIVE" mode, the multi-PAR lighting system can
be controlled solely via the included infrared remote
control. To control the lighting system in this mode, press
the MODE button repeatedly until "IR ACTIVE" appears in
the display. Then press ENTER. The cursor appears in the
bottom line of the display. Use the UP and DOWN buttons
to select "ON". Confirm the input with ENTER.
If you later want to control the system in DMX mode, by
foot pedal or in a stand-alone mode, set the "IR ACTIVE"
mode to "OFF" again in the same manner.
MAStER DiMMER
The "MASTER DIMMER" lets you set the basic brightness
of the lighting system in the stand-alone modes and when
controlling it by foot pedal. Press the MODE button re-
peatedly until "MASTER DIMMER" appears in the display.
Then press ENTER. The cursor appears in the bottom line
of the display. Use the UP and DOWN buttons to set the
desired basic brightness (00 - 99) and confirm the input
with ENTER.
14