Cameo Multi PAR Manuel D'utilisation page 11

OPERAtiOn:
Pressing the ENTER button makes the cursor appear in
the top line of the display. Now the desired program can
be selected using the UP and DOWN buttons. Confirm the
input with ENTER.
To change the colour in STATIC program 01, press ENTER
repeatedly until the cursor appears in the "CL:xxxx" field
in the bottom line. Now "blackout" (BLAC = all LEDs off)
or a colour mixture can be selected using the UP and
DOWN buttons. "RGBW" means that all LEDs (red, green,
blue, and white) operate at full power, resulting in a
bright white colour. Primary colours (R = red, G = green,
B = blue, and W = white) and colour mixtures such as
"RG" (red and green = yellow) and "RB" (red and blue =
magenta), etc., can be selected here. Confirm the input
with ENTER.
The cursor jumps to the "Flashxx" field. Here you can now
add a stroboscope effect to the selected colour. "Flash00"
stands for stroboscope effect deactivated, "Flash01" for
the slowest and "Flash99" for the fastest flash frequency.
Once the desired stroboscope effect has been set, press
ENTER to confirm the input.
11