Control Functions - Cameo Multi PAR Manuel D'utilisation

intRODuCtiOn:

COntROl FunCtiOnS:

lED multi PAR lighting system
(CLMPAR3)
• 4-channel-1, 4-channel-2, 6-channel, 8-channel, 9-channel, 16-channel, and 21-channel DMX control
• Separate control of the red, green, and blue LEDs
FEAtuRES:
• 4 x 7 bright QUAD-colour LEDs (8W) with 25° beam angle
• Music control via built-in microphone
• Colour change rate and stroboscope effect controllable via control panel, DMX, and remote control
• Multicolour colour change
• Master/slave functionality
• Rugged, flat housing
• Power consumption: 210 W
• Absolutely silent thanks to convection cooling
• Long life LEDs with especially long service life
• Lighted multifunctional LC display
• 2 additional external lights mountable on bar
• Power supplied to the external lights via 2 separate, switchable Schuko power outlets
• 28 mm TV spigots
• Multifunctional infrared remote control included
• Remote control via 4-way foot switch (CLMPARFOOT2, optional)
• Transport case included
OPERAtiOn:
The Cameo CLMPAR3 is a DMX-512 controllable LED lighting system with RGBW colour mixing that stands out
because of highly efficient, especially bright LEDs. The intensity of the four colour groups (red, green, blue,
white) can be controlled independently of one another, thus permitting an unlimited number of different colours.
The Cameo multi PAR LED lighting system can be used as a stand-alone unit, via IR remote control and foot
switch, and also in master/slave mode, with music control, and via DMX-512 protocol.
6