Control Functions - Cameo FLAT PRO CLPFLATPRO7IP65 Manuel D'utilisation

INTRODUCTION:
18 x 10 W 5-in-1 LED RGBWA FLAT PAR OUTDOOR PROJECTOR
CLPFLATPRO18IP65

CONTROL FUNCTIONS:

• 2-channel, 3-channel 1, 3-channel 2, 5-channel and 8-channel DMX control
• Red, green, blue, white and amber controllable separately
FEATURES:
• Jet-proof according to EN 60529
• 18 X 10 W 5-in-1 LEDs
• RGB colour spectrum + white + amber
• 30° beam angle
• Refresh rate 3000 Hz
• Silent operation thanks to convection cooling
• Power consumption 125 W
• Operating voltage 110 V - 240 V AC
• Special IP65 connector for the power supply
• Special IP65 connector for DMX In and Out
• Lit multifunctional LC display
• Adjustable multi-functional mounting bracket
• Master/slave mode
• Colour change rate and stroboscope effect controllable via control panel and DMX
OPERATION:
The Cameo FLAT PRO OUTDOOR projectors are DMX-512 controllable, and are characterised by highly efficient,
bright LEDs. The intensity of the five colour groups (red, green, blue, white, amber) can be controlled independently
of one another, thus permitting an unlimited number of different colours. The Cameo LED projectors can can be
used both individually and in master/slave mode, with music control, and via DMX-512 protocol.
The integrated stand/bracket offers a secure hold when using the projector as a free-standing unit, or for
assembly on trusses.
NOTE: Overhead installation may only be carried out by trained personnel. The projector must be
secured with an appropriate safety cable to prevent falling.
7