Cameo FLAT PRO CLPFLATPRO7IP65 Manuel D'utilisation page 9

Masquer les pouces Voir aussi pour FLAT PRO CLPFLATPRO7IP65:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
CONNECTIONS, CONTROLS AND INDICATORS:
1
POWER IN
Permanently attached power cord with special screw-down cable plug (dust- and jet-proof according to
IP65). Power cord with Schuko plug included.
2
POWER OUT
Permanently attached power cord with special screw-down cable plug (dust- and jet-proof according to
IP65) for powering additional CAMEO outdoor projectors (screw-on cap included). Make sure that the total
current consumption in amperes (A) of all connected devices does not exceed the specified value on the
device. It can be connected directly to an additional CAMEO outdoor projector of the same type. Matching
power cords in various lengths are available as accessories. When operating a single outdoor projector ,
the POWER OUT cable must be closed securely by the cap. The same applies for outdoor projectors that are
located at the end of a chain of lights.
3
DMX IN
Permanently attached DMX cable with screw-down special cable plug (dust- and jet-proof according to IP65)
for connecting a DMX controller (e.g., DMX mixer). Screw-down cap and DMX connecting cable with male
3-pole XLR plug included.
4
DMX OUT
Permanently attached DMX cable with screw-down special cable plug (dust- and jet-proof according to IP65)
for looping through the DMX control signal. Screw-down cap included. It can be connected directly to an
additional CAMEO outdoor projector of the same type. Matching DMX cables in various lengths are available
as accessories. When operating a single outdoor projector, the DMX OUT cable must be closed securely by
the cap. The same applies for outdoor projectors that are located at the end of a chain of lights.
5
MODE
Selection of the standalone functions, DMX modes, and DMX address.
6
ENTER
Makes it possible to change a value and confirm changes.
7
UP AND DOWN BUTTONS
Press the UP and DOWN buttons, for example, to change the stroboscope speed or DMX address.
8
LIT LC DISPLAY
Displays the operating mode and values of individual functions.
NOTE : An extensive selection of suitable IP65 DMX extension cables, IP65 power extension cables and adapter
cables, is available on the Internet at www.cameolight.com.
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Flat pro clpflatpro12ip65Flat pro clpflatpro18ip65

Table des Matières