Start Of Operation; Putting The Loudspeaker Panel Into Operation; Connecting The Mains Adapter; Putting The Subwoofer Into Operation - Medion LIFE P69042 Mode D'emploi

5. Start of operation

5.1. Putting the loudspeaker panel into operation

The loudspeaker panel runs on the mains adapter supplied.

5.1.1. Connecting the mains adapter

 Connect the plug on the mains adapter (Shenzhen Ferex Electronics Co., Ltd
FBP060-180S300J2) to the DC socket on the loudspeaker panel.
 The mains adapter needs a connection cable (supplied with the product). Put
the cable into the mains adapter socket and the plug into a wall socket.

5.2. Putting the subwoofer into operation

The subwoofer runs on the integrated mains cable.
 Insert the mains plug into a wall socket.

5.3. Inserting the batteries in the remote control

The remote control is supplied with a CR2025 3V lithium battery already inserted.
NOTE
When you use the remote control for the first time, pull out the transpar-
ent strip marked "Please remove before use" without opening the bat-
tery compartment.
The battery needs to be changed if the product fails to respond or is slow to re-
spond to the remote control. Proceed as follows to change the battery:
 Press the catch (1) and remove the battery holder complete with battery (2) from
the remote control. Comply with the legal requirements when disposing of the
used battery.
 Insert a new CR2025 3V battery in the holder with the positive terminal facing
upwards. Always make sure the battery is the right way round.
68 of 76