Ec Declaration Of Conformity; General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Stihl HTA 66 Notice D'emploi

English
24 EC Declaration of Con‐
formity
24.1 STIHL HTA 66, HTA 86 Pole
Pruners
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Category: Cordless pole pruner
– manufacturer's brand: STIHL
– model: HTA 66, HTA 86
– serial number: LA03
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, and 2014/30/EU and
has been developed and manufactured in com‐
pliance with the following standards in the ver‐
sions valid on the date of production: EN
55014-1, EN 55014-2, EN 62841-1, taking
account of EN ISO 11680-1 and EN 62841-4-1.
The EC type examination test was carried out
pursuant to Directive 2006/42/EC, Art. 12.3(b) at:
VDE Prüf- u. Zertifizierungsinstitut (NB 0366),
Merianstraße 28, 63069 Offenbach, Germany
– HTA 66, HTA 86 certification number:
40051683
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture, country of manufacture
and serial number are shown on the pole pruner.
Done at Waiblingen, 03.08.2020
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Head of Product Data,
Regulations and Licensing
25 General Power Tool Safety
Warnings
25.1 Introduction
This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the
IEC 62841 standard for hand-held motor-oper‐
ated electric tools.
48

24 EC Declaration of Conformity

STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding
an electric shock given under "Electrical Safety"
do not apply to STIHL cordless products.
WARNING
■ Read all safety warnings, instructions, illustra‐
tions and specifications provided with this
power tool. Failure to follow all instructions lis‐
ted below may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
The term "electric power tool" in the safety warn‐
ings refers to mains-operated (corded) power
tools or battery-operated (cordless) power tools.
25.2

Work area safety

a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flam‐
mable liquids, gases or dust. Power tools cre‐
ate sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
25.3

Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or groun‐
ded.
c) Do not expose power tools to rain or wet con‐
ditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the
risk of electric shock.
0458-191-9621-B