Stihl HTA 66 Notice D'emploi page 29

3 Overview
3.2 STIHL HTA 86 Pole Pruner and
Battery
1
2
5
6
7
8
11
10
21
20
22
#
1 Chain scabbard
The chain scabbard protects from contact
with the saw chain.
2 Handle hose
For holding and controlling the pole pruner.
3 Shaft
The shaft connects all components.
4 Oil tank cap
The oil filler cap closes the oil tank.
5 Battery compartment
The battery compartment holds the battery.
6 Control handle
For holding and controlling the pole pruner.
7 Ergo lever
The Ergo lever holds the release slide in posi‐
tion when the trigger is released.
8 Release slide
The release slide releases the trigger.
9 Carrying ring
For attaching the carrying system to the
brushcutter.
10 Trigger
Switches the pole pruner on and off.
0458-191-9621-B
4
3
9
12
13
14
15
19
17
18
16
11 Locking lever
The locking lever holds the battery in the bat‐
tery compartment.
12 Clamp nut
Serves to adjust the length of shaft.
13 Chain sprocket
The chain sprocket drives the saw chain.
14 Tensioning screw
Adjusts the chain tension.
15 Saw chain
The saw chain cuts the wood.
16 Guide bar
The guide bar supports and guides the saw
chain.
17 Limit stop
Holds the pole pruner against the wood while
cutting.
18 Chain sprocket cover
Covers the chain sprocket and secures the
guide bar to the pole pruner.
19 Nut
Secures the chain sprocket cover to the pole
pruner.
20 LEDs
The LEDs indicate the state of charge of the
battery and any faults.
21 Battery
Supplies power to the pole pruner.
22 Button
The button activates the LEDs on the battery.
# Rating plate with machine number
3.3 Icons
Meanings of the icons that may be on the pole
pruner and battery:
The clamp nut is unscrewed in this posi‐
tion. The shaft can be extended.
The clamp nut is locked in this position.
The shaft cannot be extended.
This icon marks the saw chain oil tank.
This icon shows the direction of rota‐
tion of the saw chain.
Rotate in this direction to increase the saw
chain tension
1 LED lights up red. The battery is too
warm or too cold.
English
29