Scheppach Air Force 4 Traduction Des Instructions D'origine page 23

from electric shocks and the risk of injury
and fi re. Read and follow these instruc-
tions before using the equipment.
Safe work
1. Keep the work area orderly
- Disorder in the work area can lead to
accidents.
2. Take environmental influences into
account
- Do not expose electric tools to rain.
- Do not use electric tools in a damp
or wet environment. There is a risk of
electric shock!
- Make sure that the work area is well-il-
luminated.
- Do not use electric tools where there
is a risk of fire or explosion.
3. Protect yourself from electric shock
- Avoid physical contact with earthed
parts (e.g. pipes, radiators, electric
ranges, cooling units).
4. Keep children away
- Do not allow other persons to touch
the equipment or cable, keep them
away from your work area.
5. Securely store unused electric tools
- Unused electric tools should be stored
in a dry, elevated or closed location
out of the reach of children.
6. Do not overload your electric tool
- They work better and more safely in
the specified output range.
7. Wear suitable clothing
- Do not wear wide clothing or jewellery,
which can become entangled in mov-
ing parts.
- Rubber gloves and non-slip shoes are
recommended when working outdoors.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
- Tie long hair back in a hair net.
8. Do not use the cable for purposes
for which it is not intended
- Do not use the cable to pull the plug
out of the outlet. Protect the cable
from heat, oil and sharp edges.
9. Take care of your tools
- Keep your compressor clean in order
to work well and safely.
- Follow the maintenance instructions.
- Check the connection cable of the
electric tool regularly and have it re-
placed by a recognised specialist
when damaged.
- Check extension cables regularly and
replace them when damaged.
10. Pull the plug out of the outlet
- During non-use of the electric tool or
prior to maintenance and when replac-
ing tools such as saw blades, bits, mill-
ing heads.
11. Avoid inadvertent starting
- Make sure that the switch is switched off
when plugging the plug into an outlet.
12. Use extension cables for outdoors
- Only use approved and appropriate-
ly identified extension cables for use
outdoors.
- Only use cable reels in the unrolled state.
13. Remain attentive
- Pay attention to what you are doing.
Remain sensible when working. Do
not use the electric tool when you are
distracted.
14. Check the electric tool for potential
damage
- Protective devices and other parts
must be carefully inspected to ensure
that they are fault-free and function as
GB | 23