GE 23 Série Manuel D'utilisation Et D'installation page 5

About the temperature controls.
COLDER
Performance Air Flow System
The Performance Air Flow System is designed to maximize temperature control in the refrigerator and
freezer compartments. This unique special feature consists of the Air Tower along the back wall of the
refrigerator and the Air Tunnel on the bottom portion of the freezer rear wall. Placing food in front of the
louvers on these components will not affect performance. Although the Air Tower and the Air Tunnel can
be removed, doing so will affect temperature performance. (For removal instructions, on-line, 24 hours a
day, contact us at ge.com or call 800.GE.CARES. In Canada, contact us at www.geappliances.ca or call
1.800.361.3400.)
ADJUST FREEZER TEMP
WARMER
9 IS COLDEST
The temperature controls are preset in the factory at 5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow 24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
ADJUST REFRIGERATOR TEMP
COLDER WARMER
9 IS COLDEST
ge.com
5