Vcr Control Buttons - Pioneer PDP-5060HD Mode D'emploi

Useful Remote Control Features
1
2
3
4
5
Mode switch
(with "VCR"
selected)
6
7
8

VCR control buttons

When the VCR is preset by the learning function of the remote
control, the remote control unit buttons will function as follows
when the Mode switch of the remote control unit is set to VCR.
• Press the input selector button INPUT 1–4 that matches the
input terminal number to which the VCR is connected, then
the VCR can be operated using 1 to 8.
• VCRs made by other manufacturers and not preset can also
be operated using the remote control unit if 1 to 8 have
learned the functions. See page 78.
1 CH +/–
Selects the channel on the VCR.
2  (PLAY)
Selects playback.
3  (REW)
Rewinds the tape and allows picture search.
4 SOURCE 
Turns the power of the VCR on and off.
5  (PAUSE/STILL)
Pauses playback and displays still pictures.
6  (FF)
Rapidly advances the tape and allows picture search.
 (REC)
7
Starts recording.
8  (STOP)
Stops tape transport.
NOTE
• The color-highlighted buttons on the remote control can
learn the control signal from another device's remote
control.
13
83
En