Pioneer PDP-5060HD Mode D'emploi page 36

TV Guide On Screen™ System Setup
07
Screen 20: Did your VCR stop playing?
• If you select "Yes", you see Screen 21.
• If you select "No", a different code is tested in Screen 19.
NOTE
Many VCRs require testing more than one code.
If you select "Test this code again", the same code is tested
again in Screen 19.
36
En
Screen 21: Confirming Your Settings
Verify the Setup information is correct.
• If it is, select "Yes, end setup", and you see Screen 22.
• If it is not, select "No, repeat setup process", and you see
Screen 1.
Screen 22: Congratulations
• You have successfully completed Setup!
• Press ENTER and you see Screen 23.
Screen 23: Helpful Information
• This screen tells you valuable information on using your
Guide.
• Press ENTER to watch TV.