Pioneer PDP-5060HD Mode D'emploi page 34

TV Guide On Screen™ System Setup
07
Screen 9: Cable Box Preparation
• Follow the on-screen instructions, and press ENTER to
display Screen 10.
Screen 10: Cable Box Code Testing
• When testing is done, Screen 11 displays automatically.
Screen 11: Cable Box Tuned to Channel 28?
• If you select "Yes", you see Screen 12.
• If you select "No", a different code is tested in Screen 10.
NOTE
Many Cable Boxes require testing more than one code.
If you select "Test this code again", the same code is tested
again in Screen 10.
34
En
Screen 12: Do you have an antenna connected?
• If you select "Yes", you see Screen 13.
NOTE
If you selected "No" in Screen 3 then you must select "Yes" in
this screen to receive a channel lineup and listings.
• If you select "No", you see Screen 13.
If you select "Yes", depending on your setup configuration, you
may see an additional screen. After that screen, you see
Screen 13.
Screen 13: Are the settings correct?
• If you select "Yes", you see Screen 14.
• If you select "No", you see Screen 1.
Screen 14: Congratulations
• Press ENTER to display Screen 15.