Selecting A Screen Size Automatically; Selecting A Screen Size For Received 4:3 Aspect Ratio Signals - Pioneer PDP-5060HD Mode D'emploi

Adjustments and Settings
AV mode
WIDE
CINEMA
PC mode except for XGA signals
Dot by
Dot
PC mode for XGA signals
FULL2
4:3
FULL
ZOOM
4:3
FULL
4:3
FULL1

Selecting a screen size automatically

The Plasma Display automatically selects an appropriate
screen size when video signals are received from a connected
HDMI equipment (see page 68). To activate this function, use
the following procedure.
1
Press HOME MENU.
2
Select "Option". ( / then ENTER)
3
Select "Auto Size". ( /
4
Select "On". ( / then ENTER)
Auto Size
Off
On
Item Description
Off Deactivates the Auto Size function.
(factory default)
Activates the Auto Size function.
On
5
Press HOME MENU to exit the menu.
NOTE
• Manually select an appropriate screen size if an image does
not automatically switch to a correct screen format.
• When the video signal contains no aspect ratio information,
the function will not work even with "On" selected.
Selecting a screen size for received 4:3 aspect
ratio signals
Specify whether the Plasma Display should choose the 4:3
mode or WIDE mode when 4:3 aspect ratio signals are received
with the Auto Size function activated.
1
Press HOME MENU.
2
Select "Option". ( / then ENTER)
3
Select "4:3 Mode". ( /
4
Select "WIDE" or "4:3". ( /
4:3 Mode
WIDE
4:3
Item Description
Wide image without side masks
WIDE
(factory default)
Keeps the 4:3 aspect ratio and presents side
4:3
masks.
WIDE
5
Press HOME MENU to exit the menu.
then ENTER)
then ENTER)
then ENTER)
4:3
11
65
En