Stihl RCA 20.0 Notice D'emploi page 45

12 Working with the pressure washer
12.3 Cleaning
The multi-functional nozzle can be set accord‐
ing to the application:
– The fan-jet nozzle
light and medium soiling.
– The rotary nozzle
sive cleaning of stubborn dirt on resistant
surfaces.
– The narrow jet nozzle
selective cleaning of stubborn dirt on resist‐
ant surfaces.
– The pouring nozzle
ing loose dirt and for watering plants.
► Before cleaning, point the water jet at an
inconspicuous spot on the surface and
check that the surface is not damaged.
► Select the distance between the nozzle and
the surface to be cleaned so that the sur‐
face to be cleaned is not damaged.
► Adjust the multi-functional nozzle so that the
surface to be cleaned is not damaged.
► Only adjust the multi-functional nozzle if the
trigger is not pressed.
► Move the pressure washer evenly along the
surface to be cleaned.
► Walk forward slowly and steadily.
For optimum performance, note the recommen‐
ded temperature ranges,
0458-048-9601-A
is suitable for cleaning
is suitable for exten‐
is suitable for
is suitable for clean‐
20.6.
12.4 Working with detergent
Detergents can increase the cleaning effect of
the water. The use of the STIHL spraying set is
required for working with cleaning agents.
Soak extremely dirty surfaces with water before
cleaning them.
Suction of detergent
2
1
► Dispense and use cleaning agent as descri‐
bed in the User Manual for the cleaning agent.
► Fill the bottle (1) with maximum 350 ml of the
detergent.
► Screw the spray nozzle (2) onto the bottle (1)
and tighten securely by hand.
Attaching spraying set
2
1
► If a nozzle is attached: Remove the nozzle.
► Attach the spraying set (1) to the pressure
washer (2) or the spray lance (3).
Setting the detergent concentration
To increase amount of consumed detergent:
► Turn rotary control (1) toward Max.
To decrease amount of consumed detergent:
► Turn rotary control (1) toward Min.
English
3
1
1
45