Stihl RCA 20.0 Notice D'emploi page 42

English
Removing the water hose
1
2
► Turn off tap.
► To unlock the coupling: Pull the ring (1 and 3)
or twist and hold it.
► Pull the coupling off the connector (4) and
adapter (2).
8.2 Using pressure washer with
folding canister
The pressure washer can be used with the fold‐
ing canister for mobile use.
So that the water can be drawn in, the height dif‐
ference between the pressure washer and the
water source must not exceed the max. suction
lift (a), 20.
The appropriate STIHL suction set must be used.
The suction set includes a water hose with a
special coupling and an integrated water filter.
Folding out the folding canister
► Unscrew and remove cover.
► Fold out the folding canister.
► Diagonally pull out the double bottom upward.
The folding canister fully unfolds.
► Fold out the edges by hand.
42
4
3
a
8 Connecting to a water source
Filling the folding canister
The folding canister must be filled with clean
water before mobile use.
► Place the folding canister on the ground so
that it cannot tip over.
► Fill the folding canister with a maximum of 15 l
of clean water.
► Attach the cover and tighten it securely by
hand.
The folding canister is closed.
Connecting suction set
► Place the folding canister on the ground so
that it cannot tip over.
► Unscrew and remove cover.
2
1
► Push the coupling (1) onto the connector (2).
The coupling (1) engages with an audible
click.
► Insert the suction bell (3) into the folding canis‐
ter in such a way that the suction bell (3) is at
the lowest point.
► Align clip (4) to the water hose and insert into
the opening of the folding canister.
► Hold pressure washer downward.
► Switch on pressure washer and press the trig‐
ger until a uniform water jet flows out of the
nozzle.
► Release the trigger.
► Lock the locking slide.
8.3 Using pressure washer from an
alternative water source
The pressure washer can draw in water from
water barrels, storage tanks and flowing or still
water bodies.
a
0458-048-9601-A