Led On Charger; Assembling The Pressure Washer; Attaching And Removing The Spray Lance; Attaching And Removing The Nozzle - Stihl Rca 20.0 Notice D'emploi

English
► Insert the battery (1) in the guides in the
charger (2) and press it home as far as stop.
The LED (3) glows or flashes green. The bat‐
tery (1) is being charged.
► When the LED (3) stops glowing: The battery
(1) is fully charged and can be taken out of the
charger (2).
► If the charger (2) is no longer being used: Dis‐
connect the mains plug (5) from the socket (6).
6.3 Displaying the state of charge
► Insert the battery.
► Briefly pull the trigger on the pressure washer
and then let it go.
The LEDs light up or flash.
► If the left LED flashes green: Charge the bat‐
tery.
6.4 LEDs on the pressure washer
The LEDs can indicate the state of charge of the
battery or any errors. The LEDs can may light up
steady or flash in green or red.
If the LEDs light up or flash green, the state of
charge of the battery is indicated.
► If the right LED lights up or flashes red: Trou‐
bleshooting, 19.1.
There is an error in the pressure washer or
battery.
6.5

LED on Charger

The LED indicates the operating status of the
charger or faults. The LED can glow or flash
green or red.
If the LED glows or flashes green, the battery is
being charged.
► If the LED glows or flashes red: Troubleshoot‐
ing, 19.
There is a malfunction in charger or battery.
40
75-100%
50-75%
25-50%
0-25%

7 Assembling the pressure washer

7 Assembling the pressure
washer
7.1 Attaching and removing the
spray lance
7.1.1 Attaching the spray lance
The spray lance can be attached to the pressure
washer depending on the appliction by the user.
2
1
► Push spray lance (1) into the pressure
washer (2).
► Twist the spray lance (1) until it engages.
The arrow on the pressure washer aligns with
the lock on the spray lance.
► If the spray lance (1) is difficult to push into the
pressure washer (2): Grease the gasket on the
spray lance (1) with a suitable grease for fit‐
tings.
7.1.2 Removing the spray lance
► Press spray lance (1) and pressure washer (2)
together and turn until limit stop.
► Pull spray lance (1) and pressure washer (2)
apart.
7.2 Attaching and removing the
nozzle
7.2.1 Attaching the nozzle
The nozzle can be attached to the pressure
washer or the spray lance.
2
1
0458-048-9601-A