Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GKS 12V-26 Professional Notice Originale

and seek medical attention should you experience any ad-
verse effects. The vapours may irritate the respiratory
system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water and moisture. There is a risk of explo-
sion.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for making straight cuts in wood
with and against the grain and mitre cuts in wood while rest-
ing firmly against the workpiece.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Battery
(2) Battery release button
(3) Lock-off button for on/off switch
(4) On/off switch
(5) Hex key
(6) Spindle lock button
(7) Base plate
(8) Fastening screw for parallel guide
(9) Scale for mitre/bevel angles
(10) Wing bolt for mitre/bevel angle preselection
(11) Cut mark 45°
(12) Cut mark 0°
(13) Protective guard
(14) Handle (insulated gripping surface)
(15) Battery charge indicator
Bosch Power Tools
(16) Temperature monitoring/overload protection indic-
ator
(17) Wing bolt for preselecting the cutting depth
(18) Cutting depth scale
(19) Adjusting lever for retracting blade guard
(20) Saw spindle
(21) Retracting blade guard
(22) Mounting flange
(23) Circular saw blade
(24) Clamping flange
(25) Clamping bolt
(26) "PowerLight" lamp
(27) Reference mark for mitre angle setting
(28) Fastening screw for dust extraction adapter
(29) Dust extraction adapter A)
(30) Dust extraction hose A)
(31) Reference mark for cutting depth setting
(32) Parallel guide/guide rail adapter
(33) Pair of screw clamps A)
(34) Guide rail A)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical data

Hand-held circular saw
Article number
Rated voltage
No-load speed
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Spindle lock
Base plate dimensions
Max. saw blade diameter
Min. saw blade diameter
Max. base blade thickness
Max. tooth thickness/offset
Min. tooth thickness/offset
Locating bore
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
– during operation B) and
during storage
Recommended batteries
English | 17
A)
A)
GKS 12V-26
3 601 FA1 0..
V 12
rpm 1400
mm 26.5
mm 17.0
●
mm 167 x 88
mm 85
mm 85
mm 0.7
mm 1.1
mm 1.0
mm 15
kg 1.3–1.6 A)
°C 0 to +45
°C -20 to +50
GBA 12V...
GBA 10.8V...
1 609 92A 4LK | (22.10.2018)