Cleaning The Filter; Electrical Connection Of The Pump; With Terminal Clamps - Cemo Cas-System Mode D'emploi

6.4

Cleaning the filter

Hose connection
P P
Filter seal
Q Q
1. Unscrew hose connection
2. Remove, clean and reinsert filter seal
3. Mount hose connection
P P
Q Q
Trolley for diesel
P P
Q Q
Trolley for AdBlue
P P
Q Q
P P
6.5

Electrical connection of the pump

with terminal clamps

Connect the 4 m-long connection cable to a suit-
able DC power source with terminal clamps:
• Red: positive terminal
• Black: negative terminal (-)
i
Important:
In the black holder on the connection
cable there is a blade fuse compliant with
DIN 72581/3C.
Blade fuse as required by DIN 72581/3C
: :
Red terminal clamp (+)
; ;
Black terminal clamp (-)
< <
®
GB
(+)
23