General Provisions; Maintenance And Monitoring; Using Original Parts; Operating The Filling Station - Cemo Cas-System Mode D'emploi

1

General provisions

The mobile filling station is state-of-the-art technol-
ogy and complies with approved technical safety
regulations.
The filling station bears the CE symbol, which
demonstrates that the EU directives and harmo-
nised standards of relevance to the filling station
were applied during its design and production.
The filling station may only be used in a techni-
cally flawless condition in the form supplied by the
manufacturer.
For safety reasons, the filling station must not be
modified (except for the addition of accessories
especially provided by the manufacturer).
1.1 Safety
Each filling station is tested for functionality and
safety before dispatch.
The filling station is safe to operate when used
correctly.
Protect the filling station from misuse.
i
Note:
For the battery version, protect the bat-
tery from moisture.
Incorrect operation or misuse poses a risk to:
• life and limb for the operator,
• the filling station and other material assets
belonging to the operator,
• the functionality of the station.
In order to avoid risks to people, animals and
property, please read these operating instructions
prior to using the filling station for the first time, in
particular all safety instructions.
Ensure that:
• you understand all the safety instructions,
• the operator of the filling station is informed
about the instructions and understands them,
• the operating instructions are to hand and
placed near the filling station.
1.1.1

Maintenance and monitoring

The filling station must be regularly checked to
ensure it is in a safe condition.
In particular, this check includes:
• a visual inspection for leaks (seal of filling hose
and valves),
• a functional test,
• completeness/identifiability of the warning,
mandatory and prohibitory signs on the station,
• the prescribed regular inspections (for details
see section 6).
1.1.2

Using original parts

Please only use original parts provided by the
manufacturer or parts they have recommended.
Also take note of all safety and usage information
provided with these parts.
This applies to:
• spare parts and wear parts,
• accessory parts.
1.1.3

Operating the filling station

In order to avoid any hazards due to incorrect
operation, the filling station may only be operated
by individuals who
• have read the operating instructions
• have proven their ability to operate the equip-
ment,
• have been tasked with operating the equipment.
i
Important:
The operating instructions must be easily
accessible for each user.
1.1.4 Warnings on the filling station for
diesel
The warning signs on the station must always be
affixed and legible.
Signs affixed by the manufacturer:
Fire, naked flames and smoking
prohibited
Location:
on the front of the tank
1.1.5 Other applicable documents and
regulations
• Operating instructions for the pump
• Operating instructions for accessories,
e.g. K24 meter
• Safety data sheet supplied by the manufacturer
for AdBlue or diesel
®
• Country-specific regulations and laws
GB
15