Initial Setup; Use; Storage; Moving The Trolley - Cemo Cas-System Mode D'emploi

GB

4. Initial setup

1. Mount delivery nozzle
nozzle holder and close delivery nozzle lock
J J
.
H H
2. In the case of the 60 l and 100 l trolley for
diesel: affix the stickers enclosed with the tank
documents permanently to the front panels.
Hazard label with UN 1202
A
(flame on red background)
Harmful to the environment
B
(dead tree/dead fish symbol)
3. For the 100 l trolley only (AdBlue and
diesel)
use the bolts (M6x10) to fix the two hose hold-
ers to the tank
G G
4. Lay the trolley down and unscrew the cap from
filling opening . Check the inside of the tank
B B
for contamination (clean as necessary, e.g.
with a vacuum cleaner).
5. Fill the tank (see section 5.5). Refill the con-
tainer using a delivery nozzle with an auto-
matic shut-off.
20
, insert it in delivery
F F
A
B
60 l trolley for diesel
A
B
100 l trolley for diesel
6. Perform a test filling as described in section
5.6, but hold the delivery nozzle
open filling opening
7. After completing the test filling, seal filling
opening tightly using the cap.
B B
►The filling station is now ready for operation.

5. Use

5.1

Storage

Important:
Material damage (deformation) of the
tank from excessive heating or mechani-
cal overload.
• Do not expose the high-grade plastic tank to di-
rect sunlight for extended periods either during
transport on the vehicle or when in storage.
Suitable storage conditions:
• Ambient temperature:
-10° C to +40 °C (diesel)
-5° C to +40 °C (AdBlue
(cover or take other suitable measures when
storing outdoors)
• Floor: level and smooth (without pointed eleva-
tions)
5.2 Moving the trolley
i
Important:
The completely filled trolley is heavy.
Considerable downhill forces are gener-
ated on steep slopes.
5.3

Loading

i
Important:
The completely filled trolley is heavy – do
not try to lift it on your own.
An empty trolley can be loaded using grip hollows
, which can be found near the wheels, and trans-
L L
port handle .
K K
in the still-
F F
.
B B
)
®