Operating Your Appliance - Frigelux Rc425Xes Manuel D'utilisation

Before plugging in
Check that you have a socket which is compatible with the plug supplied with the fridge. DO
NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 1 hour
before switching back on to allow the coolant fluid to settle.
Before filling your fridge
Before storing food in your fridge, turn the fridge on and wait for 4 hours, to make sure it is
working properly and to allow the fridge to reach the correct temperature.
If the refrigerator is installed in the moisture place, make sure to check whether the
ground wire and leakage circuit breaker are normal. If vibration noises are produced
due to the refrigerator contacting the wall or if the wall gets blackened by air convection around
the compressor, move the refrigerator away from the wall. Setting up the refrigerator may
cause jamming noise or image chaos to the mobile phone, fixed-line telephone, radio receiver,
television set surrounding it, so try to keep the refrigerator as far away as possible in such
case.

4. OPERATING YOUR APPLIANCE

Temperature Control
The appliance thermostat has 5 settings. The thermostat goes from the coldest "2", to the
hottest "8". Adjust the temperature as needed. "4" seems appropriate for use in a home or
office (ambient temperature 25°C).
To turn off the appliance, unplug it.
The temperature inside the appliance can be influenced by many factors: ambient
temperature, exposure to the sun, number of door openings and quantity of food stored...
Slight changes in temperature are perfectly normal.
1. Remarks:
K1 is "Intelligent mode" setting button.
K2 is the button for adjusting the refrigerator temperature and super cooling mode.
L1 to L7 are settings or temperature indicator lights.
Refrigerator Temperature
Freezer Temperature
L1 L2 L3
+1°C +2°C +3°C
-26°C -24°C -22°C
26
L4 L5 L6
+4°C +6°C +8°C
-20°C -16°C -12°C
L7
+4°C
-20°C