Operating Your Appliance - Frigelux Rett136A Manuel D'instructions

Before filling your fridge
Before storing food in your fridge, turn the fridge on and wait for 24 hours to make sure it is
working properly and to allow the fridge to fail to the correct temperature.

4. OPERATING YOUR APPLIANCE

Temperature Control
This appliance is with infrared sensor, to avoid malfunction of the appliance, do
Attention!
not cover the infrared sensor or place the appliance under direct sunlight or in a bright
environment.
A: Infrared sensor
B: Power switch button
C: Light mode selection button
D: Temperature display
E: Temperature adjust button: UP 1°C
F: Temperature adjust button: Down 1°C
- Press power switch button
- Light mode selection: Press light mode selection button for
mode, there are 2 light modes optional.
1) Light mode 1: When pictogram
be automatically on or off by door open and close.
2) Light mode 2: When pictogram
always turn on.
- Press button to
temperature.
Important
notice: after selecting the desired temperature, the display will continue to
show the real temperature inside the appliance, which will vary gradually until it
the selected temperature.
- Press temperature adjust buttons
temperature display from Celsius to Fahrenheit.
for 3 seconds to turn on or turn off the appliance.
increase the temperature or
displays on the LCD screen, the light will
displays on the LCD screen, the light will
to
together for 3 seconds to change the
31
3 seconds to select light
decrease
reaches
the