Publicité
The coolant needs time to settle. If the unit is turned off at any time, wait 30 minutes before
plugging it back in to allow the coolant to properly replenish.
Before filling the device
Before storing food in your freezer, plug it in and wait for 4 hours to make sure it is working
properly
.
Installing the door handle
For the convenience of transportation, the door handles are separately provided in a plastic
bag, you can install the door handles as follows:
1. Take out screw covers on the left/right side of the door, and then put them back to the
plastic bag.
2. Match the handle on the left/right side of the door, keeping axes of the screw holes in
the handle and the door in a line, as the picture shows.
3. Fix the handle with the special screws provided in the plastic bag.the special screws
provided in the plastic bag.
4. OPERATING YOUR APPLIANCE
Temperature setting
Use your device according to the control rules Following, your device has the following
functions and modes corresponding as shown in the panels of control in the image above.
30
Publicité
