•
The power outlet should be easily accessible but out of the reach of children. If in
doubt, contact your installer.
•
Be careful not to trap or damage the power cord when positioning the device.
Daily use
•
Warning! Refrigeration appliances without a 4-star compartment are not suitable for
freezing foodstuffs.
•
Never store flammable substances or liquids inside the appliance; this would cause
a risk of exposure.
•
Do not operate other electrical appliances inside this appliance (blenders, electric
ice cream makers, etc.).
•
Never put bottles or jars containing liquids in the freezer unless they are only filled
to 2/3 of their capacity, freezing expands the liquids and the container could
explode.
•
When unplugging the appliance, always hold the plug in your hands and do not pull
on the cord.
•
Do not expose the device to direct sunlight.
•
The device must be kept away from candles, light fixtures and other naked flames,
in order to avoid the risk of fire.
•
This appliance is intended exclusively for the storage of foodstuffs.
•
The device is heavy. Be careful when moving it.
•
If your device has wheels, remember that they are only used to facilitate small
movements. Do not move it on longer trips.
•
Never use the device or its parts to lean on.
•
To avoid falling objects and prevent damage to the device, do not overload the
device compartments.
To avoid contamination of food, please observe the following instructions:
•
Regularly clean food contact surfaces and accessible drainage systems.
•
Store raw meat and fish in suitable containers to avoid contact with any other food.
Warning! Cleaning and maintenance
•
Before any maintenance, unplug the appliance and disconnect the power.
•
Do not clean the device with metal objects, steam system, volatile oils, organic
solvents or abrasive components.
•
Do not use sharp or pointed objects to remove the ice. Use a plastic scraper.
Important information about the installation!
•
This refrigeration appliance is not intended to be used as a built-in appliance
•
For the electrical connections to be correct, follow the instructions provided in this
manual.
•
Unpack the device and check that it is not visually damaged. Do not plug in the
25