Publicité
When the device is powered on for the first time, the backlighting of the icons on the display
panel starts working. If no buttons have been pressed and the door is closed, the backlighting
will turn off.
For optimum food preservation, we recommend that when you start your freezer for the first
time, the temperature for the freezer is set to -18°C (0°F), if you want to change the
temperature, follow the instructions below.
Caution！When you set the temperature, you set an average temperature for the whole
freezer cabinet. The temperature inside each compartment may vary from the temperature
values displayed on the panel, depending on how much food you store and where you place
it. Ambient temperature may also affect the actual temperature inside the appliance.
Note： High temperature setting will accelerate food waste
Power:
Press and hold the
OFF.
1. When the freezer is working, in the unlocked state, you can switch the appliance
OFF by pressing
meanwhile the display panel shows "- -".
Important! Do not store any food in the freezer during this time.
2. When the freezer is in standby mode and unlocked, press the
seconds,
show normal.
Note: The display control only can be setted in the unlocked state.
Child safety:
When
the
hold the button
the
unlocked
If no button has been pressed for 20 seconds, the
Temperature:
In the unlocked state, you can switch the display mode from °C to °F by pressing
button for 3 seconds.
-
In the unlocked state,
freezer setting temperature is cyclically adjusted between -14°C and -24°C as
following.
button for 3 seconds to turn the power function ON or
button for 3 seconds, the
the
light is off, the freezer will turn ON and the display will
light is on. the freezer is locked. Press
for 3 seconds, the light is off, the freezer is in
state. It can perform other
.
button operation.
light will be on.
press button, when the
31
light
is
button for 3
and
light is on, the
on,
Publicité
