Creality CR-SCAN RAPTOR Manuel page 11

Caution
(1) If you need to scan objects with high precision, please select blue light mode (multi-line laser). In this case, marker point assistance is needed.
When the object is small, re ective marker points can be attached to the desktop or scanning pad, and there is no need to attach marker points to the su ace of the
object. If you want to scan the other side of the object, please use the multi-project stitching function of Creality Scan software to stitch the point clouds of multiple
scans into a complete model.
When the object is large, the marker points need to be attached to the su ace of the object.
(2) Select "No" in blue light mode, the neness will be higher than "Yes".
(3) The smaller the point distance, the more re ned the scanned model will be, but it will consume more memo and may also a ect the scanning frame rate.
(4) Infrared mode can be used to scan faces, human bodies and other objects without marker points. Infrared scanning also suppo s texture mode and marker point
mode scanning.
To learn more about the CR-Scan Raptor, please visit: https://wiki.creality.com/3d-scanner
The reference con guration of blue light mode is as follows: The reference con guration of infrared mode is as follows:
8